Other
F23Three 2/3-inch CCD sensors with B4 lens mount CineAlta camera |
|
Technical Specifications
Please be aware that the features/specifications can differ from country to country
General
|
Mass |
Approx. 5.0 kg (11 lb) |
|
Power requirement |
DC 10.5 V to 17 V |
|
Power consumption |
56 W (without lens, viewfinder, at 23.98PsF mode) |
|
Operating temperature |
0°C to 40°C (32°F to 104°F) |
|
Storage temperature |
-20°C to +60°C (-4°F to +104°F) |
Camera section
|
Pickup device |
3-chip 2/3-inch type Progressive CCD |
|
Aspect ratio |
16:9 |
|
Effective picture elements (H x V) |
1920 x 1080 |
|
Optical system |
F1.4 prism system |
|
Built-in filters |
A: 3200K, B: 4300K, C: 5600K, D: 6300K, E: ND0.3 (1/2ND) 1: Clear, 2: ND0.6 (1/4ND), 3: ND1.2 (1/16ND), 4: ND1.8 (1/64ND), 5: CAP |
|
Lens mount |
Sony bayonet mount (B4) |
|
Sensitivity (at 2000 lx, 89.9% reflective) |
T10 (at 23.98PsF) |
|
Registration |
Within 0.02% (all zones, without lens) |
|
Distortion |
Below measureable level (without lens) |
|
Setup card |
Memory Stick PRO |
|
Horizontal resolution |
1000 TV lines |
Signal inputs/outputs
|
Genlock video input |
BNC type x1, 1.0 Vp-p, 75 ohms |
|
Audio CH1/CH2 input (with supplied interface box) |
XLR-3-31 type (Female), line/mic/mic +48 V selectable |
|
Test output |
BNC type x1, VBS/HD Y |
|
Dual-Link HD-SDI output (with supplied interface box) |
BNC type x2 |
|
Monitor output |
BNC type x2, HD-SDI (4:2:2) |
DC input
|
DC input (with supplied interface box) |
XLR-4-pin type (Male) x1 |
|
DC output |
DC 12 V: 11-pin x1, max. 4 A DC 24 V: 3-pin x1, max. 5.5 A |
|
Lens |
12-pin x1 |
|
Remote |
8-pin x1 |
|
Viewfinder |
20-pin x2 |
|
External input/output |
Lemo 5-pin (Female) x1 |
|
Network |
RJ-45 type x1, 10BASE-T/100BASE-TX |
Supplied Accessories
|
Interface box |
|
|
Assistant panel |
|
|
Cable for assistant panel |
|
|
Assistant panel hangar |
|
|
+B4x8 screw |
|
|
Center handle |
|
|
LEMO 8-pin connector |
|
|
Operation manual |
